Olympia Chimney Chimney Cap & Crown Nationwide

Olympia Chimney Chimney Cap & Crown in White Plains: What to Know First

An Olympia Chimney cap or crown in White Plains typically costs between $385 and $1,900 to repair or replace, depending on whether you need a standard single-flue cap, a custom multi-flue cap, or full crown resurfacing. Most Olympia Chimney cap and crown jobs are completed in one visit, usually within two to three hours of setup time. We’re an independent Olympia Chimney service provider, not a manufacturer-authorized shop, which means we choose parts based on what actually holds up in Westchester County weather, not what a brand catalog says to push. If you own an Olympia Chimney product and the cap is rusting through or the crown is spalling, call (914) 350-5204 for a written price before any work starts.

Call (914) 350-5204

This page is for homeowners in White Plains and nearby Westchester towns who have Olympia Chimney caps, crowns, or flue systems and want straight answers on failure points, parts, process, and cost. No call-for-quote hedging. We publish our price ranges, we document everything with photos, and we back the work for 365 days.

• Typical Olympia Chimney cap replacement: $385-$720 installed
• Multi-flue Olympia cap (custom-fit): $850-$1,400 installed
• Chimney crown repair or resurfacing: $575-$1,100
• Full crown rebuild with new cap: $1,200-$1,900

How Olympia Chimney Products Fail - and How We Fix Them

• Olympia Chimney’s galvanized multi-flue caps corrode at the corner seams first. The factory spot welds where the mesh meets the cap frame are typically the thinnest points of galvanization. In White Plains, where winter road salt rides the wind and spring rain is acidic enough to etch galvanized steel within four or five years, we regularly see Olympia multi-flue caps with rust bleeding down onto the crown. The cap still looks fine from the ground, but the corners are paper-thin. We replace with stainless steel aftermarket caps sized to the flue tile dimensions, and we always photograph the corroded original before removal.
• The Olympia Chimney “Vacu-Stack” style cap clogs with Westchester maple and oak seed helicopters. These caps use a narrower internal baffle to improve draft in windy conditions, but that same baffle traps samaras and other fine debris. Homeowners near the Gedney neighborhood and other tree-heavy parts of White Plains call us every May with a smoking fireplace and a Vacu-Stack that’s 60 percent blocked. The fix is a full teardown cleaning, and if it’s the third time we’ve cleaned it, we usually recommend switching to a standard outside-mount cap with wider mesh.
• Crown failure on Olympia Chimney installations is rarely the crown material itself. It’s the joint where the flue tile meets the crown. Olympia’s standard crown pour leaves a cold joint around the flue tile that opens up after a few freeze-thaw cycles. Water gets in there, freezes, and the crown starts spalling from the inside out. In White Plains, where we get 30-plus freeze-thaw events from November through March, this failure mode shows up faster than in coastal climates. We cut out the loose material, pour a proper Portland-based crown with a drip edge that overhangs the brick by at least two inches, and seal the flue tile joint with a flexible crown sealant rated for chimney temperatures.
• Olympia Chimney’s standard single-flue caps have undersized mesh on the sides. The mesh openings are large enough to let stink bugs and cluster flies through in September and October. White Plains sees these pests every fall, and an Olympia cap with standard mesh doesn’t stop them from getting into the flue. We upgrade to a finer mesh screen or install a secondary insect barrier inside the cap collar. This is a $35 to $60 parts upgrade that saves a living room full of stink bugs in late September.
• The mounting brackets on Olympia Chimney caps loosen over time on clay flue tiles. Olympia’s set-screw bracket design works fine on new tile, but on older White Plains chimneys where the flue tile top edge is chipped or slightly out of round, those screws don’t bite. The cap winds up leaning or blowing off entirely in a nor’easter. We always check bracket tension during annual inspections, and on flue tiles that can’t hold a set screw, we use an inside-mount cap with a compression fit instead of an outside-mount bracket.

Our Olympia Chimney Chimney Cap & Crown Process

1. 1
   Call or text (914) 350-5204. A live person answers. We schedule a time that works for you, and you get a text when the tech is on the way. License number and named technician are provided before arrival.
2. 2
   Camera inspection first. Before touching anything, we run the Fluke camera down the flue and take photos of the cap, crown, flue tile, and smoke chamber. You see the photos. Clause 4 of the Haven Standard requires this on every visit, and we’ve done it since 2009.
3. 3
   Written diagnostic report. Corrine Halstead reviews the footage and writes up what we found: crown condition, cap corrosion level, flue tile integrity, creosote stage if applicable. You get a written scope of work with line-item pricing and a written warranty before anything is approved. No surprises after the fact.
4. 4
   Parts decision: OEM vs. aftermarket. For Olympia Chimney products, OEM is usually not worth the markup. The factory galvanized caps fail the same way as generic ones. We recommend stainless steel aftermarket caps that outlast the OEM by 10-plus years in White Plains conditions. If your Olympia cap is still under warranty, we’ll document the failure with photos and measurements so you can file a claim with the manufacturer. Most homeowners skip the claim and take the better part.
5. 5
   The repair or replacement. Cap replacement takes 45 minutes to two hours. Crown work takes longer because the new crown material has to cure before we set the cap. We work clean: drop cloths, magnetic sweeps, and a full photo record before, during, and after.
6. 6
   Walkthrough and documentation. You get a final photo report, the written warranty, and a plain-language summary of what we fixed and what to watch for. If it’s not right, the 365-Day Done Right Promise means we come back and make it right. No argument, no invoice.

Before

After

What Olympia Chimney Chimney Cap & Crown Costs in White Plains

Here’s what we charge for Olympia Chimney cap and crown work in White Plains. These are installed prices, written in advance, with the warranty included.

• Standard single-flue Olympia cap replacement: $385-$720. Price depends on access (roof pitch, chimney height) and whether we need to repair the flue tile top edge before mounting the new cap.
• Multi-flue Olympia cap, custom-measured: $850-$1,400. We measure the flue spacing on-site and order a cap that actually covers all the tiles. Off-the-shelf multi-flue caps rarely fit older White Plains chimneys correctly.
• Crown seal and minor spall repair: $575-$900. We cut out loose crown material, patch with a polymer-modified cement, and seal the flue tile joint. This is the right fix when the crown is 70 percent intact.
• Full crown rebuild with new cap: $1,200-$1,900. New form pour, drip edge, and crown sealant, plus a new stainless cap. Recommended when the crown is spalled past the point of patching or the drip edge is gone.

What moves the price: chimney height over 30 feet, roof pitch steeper than 8/12, and access issues like power lines or a neighbor’s tree canopy. What doesn’t move the price: your zip code. White Plains is White Plains. Call (914) 350-5204 for a written estimate. Estimates are free, and the price we write is the price you pay.

Why White Plains Homeowners Call Level Two Chimney White Plains for Olympia Chimney Work

Because we show you the problem before we ask you to pay for the fix. Every Olympia Chimney job starts with a camera down the flue and photographs of the cap and crown. You don’t take our word for it. You look at the corrosion, the spalling, the loose bracket. The camera does not guess. Neither do we.

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and every one of them got a written price before work started and a documented photo record when it was done. That’s not a slogan. It’s Clause 4 of the Haven Standard, and we’ve operated that way since before insurers started asking for it. Our techs are background-checked, uniformed, and trained on Olympia Chimney products specifically. When an Olympia cap fails, we know whether it’s the factory weld, the mounting bracket, or the mesh sizing, because we’ve seen the same failure mode on colonial chimneys from Gedney to Highlands.

If an Olympia part isn’t the right long-term fix, we’ll say so and offer better options from DuraFlex, HeatShield, or Gelco. We’re not married to a brand. We’re married to the flue being right. Every job carries the 365-Day Done Right Promise. If it’s not right, we make it right.

FAQs