Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Fireplace Services Across Yonkers
Fireplace service in Yonkers comes down to one thing more than any other: knowing what’s actually inside the flue before anyone touches it. Our Fireplace Services team works the rowhouse blocks, two-families, and older apartment buildings across southwest, central, and east Yonkers, not just the single-family homes. We carry a camera down every flue as standard, write the price before work starts, and show you the footage of whatever we find. If you need gas fireplace service, a wood burning fireplace inspection, damper repair, or a full conversion in Yonkers, call (914) 350-5204. We’ll give you a written scope and a written price before anyone books anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Level Two Chimney White Plains Is Yonkers’s Preferred Fireplace Services Company
Yonkers chimneys are not like the rest of the county. The housing stock here runs dense and old, with pre-1940 attached brick rowhouses and two-family homes sharing chimney stacks through party walls. That means when we scope a flue in Yonkers, we’re often looking at three or four flue tiles serving adjacent units at once. Most sweep companies in Westchester never work that configuration, so they miss what’s happening behind the neighbor’s wall. We’ve been documenting exactly those conditions since 2009 with photographed and video-recorded inspections on every single visit, and our written-price-before-work policy applies to every fireplace service in Yonkers, no exceptions.
Reviews matter, but we prefer to let the camera do the talking. Every Yonkers customer receives a documented photo and video record of their flue, firebox, damper, and crown, regardless of whether they book a cleaning or a repair. When we find third-degree creosote, a spalled clay tile liner, or backdrafting from an oil-to-gas conversion, you’ll see it yourself. Clause 4 of the Haven Standard requires that photo record on every job. It’s been our default since 2009. If you call Monday through Sunday, a live person answers. Always. No voicemail tree, no “leave a message and we’ll get back to you.”
Our Fireplace Services Services in Yonkers
Yonkers’s older housing stock means fireplaces here are often original to the building, vented into chimneys that predate modern code. The four services Yonkers homeowners call us for most are below, each priced after a camera inspection, never before.
Gas Fireplace Service
Gas fireplaces in Yonkers usually live in converted wood burning fireboxes. The conversion was often done by a plumber or gas fitter who never touched the flue. We clean the burner, check the gas valve and thermocouple, verify the pilot light assembly, and camera-scope the flue to confirm the venting is still doing its job. If the gas logs are producing soot on the glass, that’s usually a venting problem, not a cleaning problem. We fix the cause, not the symptom.
Wood Burning Fireplace
A wood burning fireplace in Yonkers means dealing with whatever the river wind pushed down the chimney and whatever the last sweep left behind. We’ll tell you what kind of wood burns cleanest given your firebox dimensions and flue height, and whether the damper is the right size for the opening. Many pre-war Yonkers fireplaces have original cast-iron dampers that have warped from decades of heat. We replace them with modern top-sealing units that actually close when they should.
Fireplace Insert
Fireplace inserts in Yonkers rowhouses usually mean installing a high-efficiency wood or gas insert into a firebox that was never designed for one. The fit matters: too small and you lose heat up the flue; too big and the firebox cracks. We measure the firebox, document the flue condition with the camera, and recommend an insert that matches both the heating load and the existing chimney structure. If the flue needs relining first, you’ll see why on video before you pay for the liner.
Damper Repair
Damper problems in Yonkers are almost always either a rusted throat damper that won’t close or a missing top damper that lets cold air pour down the chimney in winter. A fireplace that drafts fine in October but fills the living room with smoke in February is often just a damper that no longer seats properly. We repair, replace, or install top-sealing dampers depending on what the camera and a draft test show. For older Yonkers houses, the top-sealing route is often the smarter long-term fix because it actually protects the flue from rain and the river wind.
BeforeAfterTrusted Brands We Service in Yonkers
We service fireplaces and vents built with components from Gelco, Olympia Chimney, and Copperfield, and we keep the most common replacement parts staged for Yonkers zip codes so we’re not running back to a supply house mid-job. Damper assemblies, firebrick, gas log sets, and chimney caps for older masonry work by Olympia Chimney are the parts we replace most often in Yonkers fireplaces. When a wall pass-through or top plate is failing, Copperfield’s stainless options hold up better against the damp air coming off the Hudson than the galvanized originals.
Common Fireplace Services Problems We See in Yonkers Homes
- Third-degree creosote that a brush can’t remove: In century-old rowhouse flues, creosote bakes into a hard tar glaze that a standard sweep just polishes. The firebox still smokes, and the homeowner thinks the chimney is clean. We chemical-treat or mechanically remove it, and we’ll show you the before and after on camera.
- Shared party-wall stacks hiding real danger: One unit’s deteriorated mortar or missing chimney cap sends rain and animals into every adjacent flue. Only the homeowner with the visible fireplace calls for service. That’s why we always scope the full stack, not just the flue we were called for.
- Oil-to-gas conversion backdrafting: After Yonkers’s widespread oil-to-gas conversions, many flues are now dramatically oversized for the gas appliances they serve. Cold river air pushes down the stack, condenses flue gases into corrosive acid, and silently eats the liner. The first sign is usually a faint exhaust smell in the basement, not the fireplace.
- Firebox cracks and spalled brick: Decades of heat cycling plus moisture intrusion from the Hudson’s damp wind cause firebox mortar and brick to spall. Small cracks become unsafe openings that can let heat reach combustible framing. We document every crack with the camera and recommend repair only when the footage shows it’s needed.
Pricing for Fireplace Services in Yonkers, NY
A gas fireplace service call in Yonkers typically runs $189 to $289, including the camera scan and a written condition report. Wood burning fireplace cleaning runs $215 to $365 depending on flue height and creosote class. Damper repair runs $145 to $425 depending on whether we’re repairing the existing throat damper or installing a top-sealing replacement. Firebox repair starts around $450 for minor repointing and goes up from there depending on how many bricks are spalled. A full fireplace conversion from wood to gas in Yonkers runs $1,400 to $3,800 depending on the insert, the flue condition, and whether relining is required. We always scope first, then price. Never the reverse. Call (914) 350-5204 for a free, written, no-pressure estimate.
We Also Serve Cities Near Yonkers
If you’re in Mount Vernon, Eastchester, New Rochelle, or Ardsley, we cover those areas with the same camera-first written-price standard. The housing stock changes once you leave Yonkers, and so do the chimney conditions. You can read more about what we do across the region on our Fireplace Services in Yonkers page, or call and tell us what you’re seeing.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Yonkers
We don’t open the wall and we don’t guess. We run a camera down every flue in the shared stack and document the footage. A cracked, spalled, or missing clay tile liner shows up clearly on video, as does any backdrafting when the wind shifts off the Hudson. You see the video, we explain what it means in plain English, and the written scope lists the exact flue and the exact repair. Call (914) 350-5204 for an inspection, and you’ll walk away with the footage either way.
No, not safely or legally. The original chimney in a 1920s Yonkers rowhouse was built for coal or wood, not for the exhaust profile of a modern gas fireplace. The flue is usually unlined or has deteriorated clay tiles, and it’s almost always oversized for a gas appliance. Converting without relining means risking carbon monoxide backdrafting into your unit or a neighbor’s. We reline the flue with HeatShield or a stainless liner as part of any conversion, and we’ll show you the before and after footage.
Yonkers’s elevation changes and the cold, damp wind coming off the Hudson create inconsistent draft conditions that vary neighborhood to neighborhood. When the wind hits the exposed western face of a chimney stack, it can push exhaust backward down the flue, especially if the flue is unlined or oversized. We correct it by installing a properly sized liner, a top damper, or a wind-resistant cap, depending on what the camera and a draft test show.
A Level 2 inspection is a defined standard under NFPA 211, but a lot of companies call any flashlight look a “Level 2.” A camera scan is a physical video run down the full flue length. We do both, because Clause 4 of the Haven Standard requires a documented photo and video record on every job, not just the ones where we suspect a problem. For a shared rowhouse stack, a camera scan is the only way to see what’s happening in the flues that don’t connect to your fireplace.
No. Third-degree creosote is a hard, tar-like glaze that a standard brush will not remove. Brushing it just polishes the surface and leaves the fire hazard in place. In Yonkers rowhouses with century-old flues, this is the most common misdiagnosis. We remove third-degree creosote with chemical treatment or mechanical rotary equipment, and we’ll show you the after footage so you know it’s actually gone. Call (914) 350-5204 if you’ve been told a brush will handle it. It won’t.
Written by Corrine Halstead, Owner at Level Two Chimney White Plains, serving Yonkers and Westchester County with camera-documented chimney inspections and written-price fireplace services since 2009.
